TU2508 High Precision 10 X 30 Mini Lathe
Such model of MM-TU2508 is the high precision 10" X 30" inch Lead Screw Metal Bench Lathe which is been made in ISO9001 factory from MAXNOVO MACHINE with CE Safety Certification. New feature at this mini lathe is the distance between Centers is much longer up 750 mm. Trust Bearing, Feed Gear rounded toothed wheels, Leading Spindle runs on Two Porous Bearings, MT4 Spindle Taper, MT2 Tailstock Taper and the Powerful 850W Maintenance Free motor to make it high performance and smooth running. Any one of our Lathe Machine distinguishes itself by quality, accurate, sustainability and consistent value. Nearly constant torque over the entire speed range and this metal lathe is for demanding users.
Main Feature :
Convincing Arguments: Quality, Efficiency and Price
- Distance between Centers is longer 750 mm and Max. Swing Over Bed is Ø 250 mm
- MT4 Spindle Taper, MT2 Tailstock Taper, 850W Powerful Motor
- Lead Screw Run on Two Porous Bearing
- Precise manufacturing
- Powerful, maintenance free motor
- Heavily ribbed prism bed made of grey cast iron, inductively hardened and precision ground
- Hardened and ground bed guide-ways
- Guaranteed true running accuracy of the spindle nose of better than 0.009 mm
- True running accuracy-Lathe chuck better than 0.04 mm
- Automatic longitudinal / leading spindle drive
- With leading spindle for threading or automatic longitudinal turning
- Right/left handed rotation switchable on the control panel
- Leading spindle run on two porous bearings
- Hand-wheels on the slide with adjustable precision scaling of 0.04 /0.01 mm
- Change gear kit for thread cutting
- Thrust bearing
- Emergency-Stop push button and low-voltage release
- Lead Screw Lathes with Feed Gear For Demanding Users
- Two Taper Roller bearing of P5 quality
- Acceptance certificate and Stable Value
- Smooth and high-performance powerful motor drive excellent control
- Feed gear rounded toothed wheels and running in the oil bath
- High-precision tool chuck for higher speeds
- Hardened spindle nose with a spindle hole of Ø 26 mm
- High power output and particularly smooth running
- Nearly constant torque over the entire speed range
- All guide-ways adjustable via V-ledges free of play
- Fully equipped machine, the user can immediately start to work productively
- Certificate of Original (CO, FORM A, FORM E, FORM F )
Technical Data :
|
Product Name :
|
10 X 30 inch Lead Screw Bench Lathe with Feed Gear
|
|
Product Item :
|
MM-TU2508
|
|
Machine Data
|
|
Max. Swing Over Bed :
|
Ø 250 mm
|
|
Distance Between Centers :
|
750 mm ( Longer Distance )
|
|
Centre Height :
|
125 mm
|
|
Bed Width :
|
135 mm
|
|
Spindle
|
|
Spindle Taper :
|
MT 4
|
|
Spindle Hole :
|
Ø 26 mm
|
|
Quadruple Tool Holder Height :
|
Max. 13 mm
|
|
Speed Range
|
|
Spindle Speed :
|
125 – 2000 RPM
|
|
Number Of Steps :
|
6 Steps
|
|
Tailstock
|
|
|
Tailstock Taper :
|
MT 2
|
|
Tailstock - Sleeve Travel :
|
65 mm
|
|
Travels
|
|
Travel Top Slide :
|
70 mm
|
|
Travel Cross Slide :
|
110 mm
|
|
Feeds and Thread Pitches
|
|
Longitudinal Feed in the Range of :
|
0.07– 0.2 mm / rev
|
|
Pitch-Metric in the Range of :
|
0.2 – 4 mm
|
|
Pitch-Inch in the Range of :
|
8 – 56 TPI
|
|
Electrical Connection
|
|
Connecting Voltage :
|
Single Phase 230V or Three Phase 400V
|
|
Frequency :
|
50 HZ or 60 HZ
|
|
Main Motor :
|
850W Powerful motor
|
|
Gross Weight :
|
185 KGS
|
|
Packing Size :
|
1400 X 610 X 610 mm
|
|
Standard Accessory :
|
Three Jaw Chuck Ø 125 mm
Steady Center MT4 and MT2
HSS Lathe Chisel
Splash Board and Chip Tray
Complete Metal Change Gears
Quadruple Tool Holder
Tools and Tool Box
|
